List of all BSC Change Proposals

This is the page teaser section. Here is a very short summary of the subject. It should be approximately forty to fifty words long.2 

jgfjfgjf

CP1570 is a Housekeeping change seeking to correct minor errors identified during the preparation for implementation of Approved Modification P375 ‘Settlement of Secondary Balancing Mechanism (BM) Units using metering behind the site Boundary Point’ as part of the June 2022 BSC Release.

CP1535 seeks to Add the North Sea Link (NSL) Interconnector to the BMRS. CP1535 will also enable the withdrawal of the CP1516 interim solution to incorporate data from IFA2 and ElecLink Interconnectors on the BMRS.

BSCP501 Amendments to clarify the D0312 process Current Status

Page teaser

Updates to BSCP520 to align with working practices and UMSUG recommendations

BSCP70 Amendments for Interconnector Administrator and Interconnector Error Administrator

Clarification to 'Change of Ownership' process in BSCP537

Treatment of Low Capacity Connections for Site Specific Line Loss Factor Calculations

Housekeeping change to address errors in the approved changes to BSCP514 for CP1515

Changes to BSC Configurable Items for the TERRE Final Implementation Date

New Interconnector Fuel Type Categories: ElecLink & IFA2

Number of register digits for smart Meters

Updates removing inconsistencies within and between BSCP601, CoP3 and CoP5

Improving the format of BSCP11 forms

Clarification of BSCP40 definitions and processes

Allow the online management of registrations, Market Entry and Market Exit

Amend BSCP503 to add new recipients of the D0355 data flow

Updating references to the British and International Standards within the relevant Code Subsidiary Documents.

Updates to BSCP520 to align with working practices and UMSUG recommendations

New Interconnector fuel type

Allowing ‘off site’ Commissioning of current transformers preinstalled in cut outs or switchgear at manufacture for use in low voltage (LV) installations

Amend BSCP201’s references to dual/single pricing following implementation of P305

Changes to European Transparency Regulation data to align with latest ENTSO-e Manual of Procedures

Removal of the requirement to submit sampling data for Profile Classes 5-8 following the implementation of P272

Correction to P302 footnote in BSCP504

Amend the BSCP537 Appendices to add a requirement for Suppliers and MOAs to demonstrate the ability to send and receive Smart Meter Configuration details

Updates to BSCP537 Appendix 1 ‘Self-Assessment Document’ to incorporate an additional question for Suppliers on Meter Operation Code of Practice Agreement Accreditation for Meter Operator Agents

Updates to BSCP537 Appendix 1 ‘Self-Assessment Document’ to incorporate an additional question for Meter Operator Agents on Meter Operation Code of Practice Agreement Accreditation

Introduction of data flows for Half Hourly Meter Operator Agents to pass on Commissioning information when there is a Change of Agent

Introduction of two new dataflows for Commissioning in the Metering System process for LDSOs, Suppliers and MOAs. Use of Data Transfer Network

Introduction of a rejection response dataflow for a D0170 ‘Request for Meter System Related Details’ request from the Meter Operator Agent to the Licensed Distribution System Operator where a D0215 ‘Provision of Site Technical Details’ response is required.

Introduction of an objection window for Housekeeping Change Proposals

Add a form and associated process steps to BSCP15 for registering Non-Standard BM Unit configurations

Causes and treatment of large Line Loss Factors

Lack of clarification surrounding the timeliness of Proving Tests and documentation for CVA MOA in BSCP02

Changes to BSCP27 and Technical Assurance Agent Service Descriptions to remove constraints to service improvement

Amendments to BSCP128 to align with BSCP68 timescales for LLF submissions for BM Units transferring from SMRS to CMRS and vice versa

Align the NETA IDD spreadsheets with the live implementation of the SAA-I014 flow

Remove the exclusion of Change of Measurement Classes in BSCP533 Appendix B

Removing example Advice Notes, Backing Sheets and Confirmation Notices from BSCP301

Validation of power transformer and cable/line loss adjustments

Introduction of Additional SVAA Validation at SVA Run time

Changes to BSCP550 – Shared Metering Arrangements